Cassette air conditioner installation — Shaqra

Prepare the installation site and ensure the water and drainage connections are in place.

Install the bathtub in the location and adjust the level correctly.

Connecting the drainage and water systems and ensuring tight insulation to prevent leakage.

Seal the joints with silicone to ensure no water leaks.

Operational test and verification of drainage safety and the absence of leaks.

Empty the wardrobe of clothes and contents.

Remove the doors and internal shelves first.

Disassemble the screws and connections between the side and top panels.

Separate the pieces and arrange them in an organized manner for easy transport or later assembly.

Disassemble the mattress and panels first.

Carefully unscrew the screws and side pieces.

Arrange the parts and screws to facilitate reassembly.

Reassemble the frame and tighten the screws securely.

Place the mattress and make sure the bed is stable.

Locate the leak using a leak detection device.

Repair the leak by welding or replace the damaged part.

Evacuate air and moisture from the pipes using a vacuum pump.

Recharge the Freon with the appropriate amount.

Test the air conditioner to ensure there are no leaks and that the cooling is working efficiently.

Positioning and leveling: Use a spirit level (or laser) to ensure the mirror is perfectly level and to determine the appropriate viewing height.

Choosing the right mounting hardware: Selecting the appropriate "dowel" and screws for the type of wall (whether it is gypsum board or concrete) to ensure that it can bear the weight of the mirror.

Professional drilling: Using specialized drill bits that do not cause cracking of the ceramic or wall.

Secure installation: Securely attach the rear brackets or side clips, adding a protective backing layer if necessary to prevent vibration.

Cleaning and polishing: Cleaning the mirror from fingerprints or dust resulting from the hole and delivering it to you shiny and ready.

Site inspection – determining the appropriate location for the sign and ensuring its visibility to the public.

Design and preparation of the board – preparing the design and printing in the appropriate size.

Artistic installation – securely and professionally fixing the frame and panel.

Inspection and delivery – Ensuring stability and quality before delivery to the customer.

Determine the appropriate location for placing the air conditioner and provide good ventilation.

Securely and firmly install the indoor unit.

Connecting pipes and wires between the indoor and outdoor units.

Vacuum the air and turn on the air conditioner to ensure cooling efficiency.

Disconnect the electricity from the air conditioner to ensure safety.

Unscrew the outer cover to access the damaged dynamo.

Remove the old dynamo and disconnect the wires.

Install the new dynamo and connect the wires correctly.

Turn on the air conditioner and test the fan to make sure it is working efficiently.

Disconnect the electricity from the air conditioner to ensure safety.

Open the maintenance hatches and access the indoor unit.

Clean the filters and evaporator using water or dedicated cleaning materials.

Clean the water drainage channel and make sure there are no blockages.

Restart and check the cooling power and airflow improvement.